KeVin King

Http://www.TeamGoNads.com

Price: $24.99




There is something a lot of us Go-Pedders want when we ride our Go-Peds. MORE LOW END. Seriously who wants a Go-Ped with really boggy or slow low end? I'm sure you want just a bit more punch when you hit that throttle, right?

The Folks at Team Gonads have come with something that will definitely help you out with your bad low-end problems.

The X-Port, from my first look at this thing, I thought it was something that crawled out of the ocean like some kind of sea creature. The X-Port also looked like some funky cookie cutter too! I The benefits of this product were unfamiliar to me till I experienced them myself. I learned that this product does have a purpose, not in one way but many ways.

The X-Port comes with very easy to follow instructions for your installation fun. One thing that bothered me was this statement in the instructions "For tuned pipes you may have to grind a bit off the short screws to make them work." I was planning to put the X-Port with the ADA pipe because ADA pipes have more a top end power then the low-end power. Well I don't have tools to grind down screws so I just put the X-port on my stock canister on my G230RC. BUT NOW, the X-Port now comes with bolts for pipes. So that little mishap is all worked out!

My first run with the X-Port was at the SF ride (May 26th). The X-Port DID in fact add more low-end power without any lose of top end power, which is a total PLUS. I don't have temperature gauges to see if my exhaust ran cooler due to the fins on the X-Port, but I'm totally satisfied with this product. Troy Givmar (T-Boy) got a chance to ride my Bigfoot at the SF ride and also noticed the power the X-Port provided. The X-port gives your engine a "header" effect.

The goal of headers is to make it easier for the engine to push exhaust gases out of the cylinders. Headers are one of the easiest bolt-on accessories you can use to improve an engine's performance. And the X-Port is the first of its kind. It not only acts as a header but it also acts as a cooling device because of its fins.

The X-Port can fit on any canister, the g23, g2d or g230rc. There are bolts that are provided for the canister, X-Can and for a pipe. There are 2 exhaust gaskets that are included also.

The X-Port is easy to install and doesn't even punch anywhere near a hole in your pocket. It performs and it's the first of its kind. Innovative products are coming out of no where ALL the time and this product really does work.

__________________
KeVin King

If you're not gonna help....shut it